An optimal determination of variable antenna height and power for in-orbit SAR operations     

Kang-Min Park Hyung-Myung Kim 《Geoscience and Remote Sensing Letters, IEEE》2005,2(2):196-200

An optimal power and antenna height determination over a wide range of incidence angles is proposed for in-orbit operations of the spaceborne stripmap synthetic aperture radar (SAR) with variable antenna height and variable radiating element power. The antenna height and the average transmitted radio-frequency power of a radiating element for each incidence angle are determined so that the mapping area can be maximized with the constraints on the signal-to-noise ratio, ambiguities, and swath width, given the SAR geometry (an altitude and incidence angles) and radar wavelength. With the receive-chain power consumption of one transmit/receive module (P/sub r/=10 mW) and the SAR instrument power consumption without the phased array antenna (P/sub I/=5 W), the illustrative design example shows that the mapping area of the proposed SAR for the maximum incidence angle (/spl eta//sup max/=75/spl deg/) is about 269.1% of that resulted from utilizing only the variable antenna height. The proposed optimization would have a more beneficial effect on applications that need the high-incidence-angle operations.  相似文献   

A coupled climate model simulation of the Last Glacial Maximum, Part 1: transient multi-decadal response   总被引：2，自引：1，他引：2  

S.-J. Kim  G. Flato  G. Boer  N. McFarlane 《Climate Dynamics》2002,19(5-6):515-537

  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure     

Bong Yoo  Yang‐Hann Kim 《地震工程与结构动力学》2002,31(10):1777-1792

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Isostasie flexurale et érosion différentielle : modélisation numérique appliquée au seuil du PoitouFlexural isostasy and differential erosion: numerical modelling applied at the ‘Seuil du Poitou’     

Jean-Christophe Maurin  Kim Renaud 《Comptes Rendus Geoscience》2002,334(16)

One uses the principle of flexural isostasy to represent the uplift of the ‘Seuil du Poitou’ in response to erosion. The model indicates that a different uplift of on the last five millions years resulted from an erosion paradoxically stronger in the crystalline basement than in the limestones bedrock. To cite this article: J.-C. Maurin, K. Renaud, C. R. Geoscience 334 (2002) 1149–1155.  相似文献   

Wave velocities and attenuation of shaley sandstones as a function of pore pressure and partial saturation   总被引：3，自引：0，他引：3  

Nam H. Pham  †  José M. Carcione  Hans B. Helle  Bjørn Ursin 《Geophysical Prospecting》2002,50(6):615-627

We obtain the wave velocities and quality factors of clay‐bearing sandstones as a function of pore pressure, frequency and partial saturation. The model is based on a Biot‐type three‐phase theory that considers the coexistence of two solids (sand grains and clay particles) and a fluid mixture. Additional attenuation is described with the constant‐Q model and viscodynamic functions to model the high‐frequency behaviour. We apply a uniform gas/fluid mixing law that satisfies the Wood and Voigt averages at low and high frequencies, respectively. Pressure effects are accounted for by using an effective stress law. By fitting a permeability model of the Kozeny– Carman type to core data, the model is able to predict wave velocity and attenuation from seismic to ultrasonic frequencies, including the effects of partial saturation. Testing of the model with laboratory data shows good agreement between predictions and measurements.  相似文献   

Seismic analysis of base-isolated liquid storage tanks using the BE–FE–BE coupling technique     

Moon Kyum Kim  Yun Mook Lim  Seong Yong Cho  Kyung Hwan Cho  Kang Won Lee 《Soil Dynamics and Earthquake Engineering》2002,22(9-12):1151-1158

A three-dimensional soil–structure–liquid interaction problem is numerically simulated in order to analyze the dynamic behavior of a base-isolated liquid storage tank subjected to seismic ground motion. A dynamic analysis of a liquid storage tank is carried out using a hybrid formulation, which combines the finite shell elements for structures and the boundary elements for liquid and soil. The system is composed of three parts: the liquid–structure interaction part, the soil–foundation interaction part, and the base-isolation part. In the liquid–structure interaction part, the tank structure is modeled using the finite elements and the liquid is modeled using the internal boundary elements, which satisfy the free surface boundary condition. In the soil–foundation interaction part, the foundation is modeled using the finite elements and the half-space soil media are modeled using the external boundary elements, which satisfy the radiation condition in the infinite domain. Finally, above two parts are connected with the base-isolation system to solve the system's behavior. Numerical examples are presented to demonstrate the accuracy of the developed method, and an earthquake response analysis is carried out to demonstrate the applicability of the developed technique. The properties of a real LNG tank located in the west coast of Korea are used. The effects of the ground and the base-isolation system on the behavior of the tank are analyzed.  相似文献   

Palaeomagnetic and rock-magnetic studies of Cretaceous rocks in the Gongju Basin, Korea: implication of clockwise rotation   总被引：2，自引：0，他引：2  

Seong-Jae Doh  Wonnyon Kim  Dongwoo Suk  Yong-Hee Park  Daekyo Cheong 《Geophysical Journal International》2002,150(3):737-752

  相似文献   

Dinosaur tracks from the Cretaceous of South Korea: Distribution, occurrences and paleobiological significance   总被引：2，自引：0，他引：2  

Min Huh  Koo Geun Hwang  In Sung Paik  Chull Hwan Chung  Bo Seong Kim 《Island Arc》2003,12(2):132-144

Abstract   Abundant dinosaur fossils including dinosaur footprints, eggs and nests, teeth and bones have been found from the Cretaceous non-marine deposits of Korea. Among them, dinosaur tracks are the most distinctive, and some track sites are among the most famous in the world. Until now, 27 dinosaur track localities have been discovered from the Cretaceous strata in the Gyeongsang Basin and several small basins. Ornithopod tracks are most abundant at most Korean track sites, and most of them are identified as Caririchnium ; that is, large ornithopod footprints with wide hoof impressions. Most theropod tracks are found in Neungju Basin and they consist of various types of small or medium-sized bird-like footprints, and other large footprints. Sauropod tracks are also abundant in the Gyeongsang Basin. The sauropod tracks vary in size, shape, and pattern of trackway, and suggest that diverse sauropods existed in this area. These diverse tracks in South Korea suggest that various dinosaurs flourished at the margins of lakes distributed in the southern part of the Korean Peninsula during the Cretaceous.  相似文献   

Landslide susceptibility analysis using GIS and artificial neural network     

Saro Lee  Joo‐Hyung Ryu  Kyungduck Min  Joong‐Sun Won 《地球表面变化过程与地形》2003,28(12):1361-1376

The purpose of this study is to develop landslide susceptibility analysis techniques using an arti?cial neural network and to apply the newly developed techniques to the study area of Yongin in Korea. Landslide locations were identi?ed in the study area from interpretation of aerial photographs, ?eld survey data, and a spatial database of the topography, soil type and timber cover. The landslide‐related factors (slope, curvature, soil texture, soil drainage, soil effective thickness, timber age, and timber diameter) were extracted from the spatial database. Using those factors, landslide susceptibility was analysed by arti?cial neural network methods. The landslide susceptibility index was calculated by the back‐propagation method, which is a type of arti?cial neural network method, and the susceptibility map was made with a geographic information system (GIS) program. The results of the landslide susceptibility analysis were veri?ed using landslide location data. The validation results showed satisfactory agreement between the susceptibility map and the existing data on landslide location. A GIS was used to ef?ciently analyse the vast amount of data, and an arti?cial neural network to be an effective tool to maintain precision and accuracy. The results can be used to reduce hazards associated with landslides and to plan land use and construction. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献